Do you know how to handle a malfunction in the sand and dust test chamber?


What is a sand and dust test chamber?
 
The sand and dust test chamber is used to test the sealing performance of the product's outer shell, mainly using two levels of testing methods: IP5X and IP6X. Simulate the sand and dust environment encountered by the product during production, transportation, and storage to test the protective performance of its casing.
 
Reason for malfunction
 
During the testing process of the sand and dust test chamber, operational failures may occur due to power outages, operational errors, and other reasons. How to handle test failures without affecting the reliability and authenticity of the test results. Here are a few troubleshooting methods for sand and dust test chambers.
 
1、 Power on instrument panel
 
The dustproof test box's startup instrument does not light up and has no power: check if the power supply is normal, check if the phase sequence is normal, and if there is a neutral wire.
 
2、 Not blowing dust
 
Check if the blower is working properly or if it is too small, and check if the dust is dry.
 
3、 Not vibrating
 
Check if the vibration motor is functioning properly.
 
4、 Regular operation
 
The sand and dust test chamber should be managed and operated by a dedicated person, and the box and blower should be cleaned regularly. Professional maintenance should also be carried out regularly.
 
5、 Temperature
 
In order to stably utilize the functions and performance of the test chamber, a space with a perennial temperature between 15 ° C and 25 ° C and a relative humidity of less than 85% should be selected.
 
6、 Safe distance
 
The distance between adjacent walls or objects. The environmental temperature of the installation site should not change rapidly
 
7、 Installation environment
 
It should be installed in a place without direct sunlight, in a well ventilated area, away from combustibles, explosives, and high-temperature heat sources. The equipment should be installed in a place with less dust and as close to the power supply as possible.
 
8、 The device is out of battery
 
Check if the power supply is normal, if the phase sequence is normal, and if there is a neutral wire.
 
Summary: Yisheng Taihe reminds that during the use of the sand and dust test chamber, professional personnel should be equipped to inspect the power supply equipment, regulate the temperature and humidity of the environment, ensure good ventilation and no flammable or explosive materials around the product, and carry out daily maintenance and cleaning of the product to reduce inconvenience caused by machine failure.